Frequent Mold Growth in Your House? Here are 5 Possible Causes

 

Mold can be a huge problem when it comes to the health of your home and family, but it can also be difficult to get rid of without some preparation. Fortunately, mold removal doesn’t have to be done by yourself when mold removal Burlington services are ready to help. This blog post will list some of the most common causes of mold growth in homes, so that you can better prepare yourself for future incidents.

Leaky Pipes:

A common cause of mold growth is when water seeps into your home and settles on your walls, floors or ceilings. If you have been experiencing leaks around your faucets, sinks and shower drains then you should inspect these areas for mold growth immediately. The most likely areas are behind cabinets and under carpeting as they are hard to dry out. Another sign is black specks on your baseboards or near windows where condensation can build up.

Poor Ventilation:

According to the experts of mold removal in Burlington, if you live in an area with humid climate, your home can become a breeding ground for mold. Make sure your home has adequate ventilation to prevent mold growth. Typically, a good flow of fresh air through your house will keep moisture levels low enough that mold won’t grow.  Additionally, consider adding an exhaust fan over your stove and other heat sources like a fireplace, as well as vents with fans throughout your home.

Leaking Air Conditioner:

Be sure to check your air conditioner on a regular basis. A leaky condenser or blower will allow water to get into your home through your HVAC system. If you suspect that your air conditioner has become a source for mold growth, make an appointment with a professional immediately.

Damp Basement:

If you live in a house with a damp basement, you’re more likely to suffer from mold growth than someone who lives on a higher floor. Basement is typically subject to higher moisture since they are located below ground level. Condensation and moisture can build up on your walls, especially if you have poor ventilation. So, look for any cracks or leaks in the foundation or roof. Experts also recommend running an exhaust fan during humid months and installing dehumidifiers during winter.

Leaking Roof:

When a leaky or damaged roof allows water to get into your attic, it will cause mold to grow. Check your roof for any signs of leaks soon, because they can cause significant damage to your home and belongings over time. Besides mold removal in Burlington, you might also need to replace part or all of your roof.

Mold spores grow in warm, moist places, and they can easily spread to other rooms in your home. Removing mold by yourself may also do more harm than good. These common causes of mold growth should help you understand why hiring an expert is the safest option when it comes to mold removal in Burlington homes.

Dispelling Myths about Automated Building Systems

In spite of the fact that automated building systems have been around for many years, there are still many misconceptions about them, which could potentially keep you from enjoying the wide range of benefits these systems offer your building and its inhabitants. In this article, we’ve debunked some of the most common misconceptions about automated building systems to give you an idea of what you can realistically expect when your facility goes automated.

Installing Automated Systems Isn’t Complicated

Indeed a myth! Building automation and control systems must be installed and programmed by an expert. Hiring an expert to install your automated system is an excellent idea that saves you both time and money in future issues. An expert will be able to ensure your system operates at peak efficiency while also reducing any confusion caused by complex functions.

My Facility is Too Old/Small for Automation

An office or commercial setting doesn’t have to be a brand-new place with every cutting-edge smart technology known to man. In fact, even if you operate in an older facility, chances are there’s still plenty of space for some automated systems. All building types, including commercial and residential, can be retrofitted to become a smart building that save energy and provides a comfortable environment. Automation can save property owners money over time by doing turning down energy-guzzling heating and cooling systems when nobody is at the facility or tuning HVAC settings based on weather and other conditions.

It’s Hard to Program the System

You might think that programming a system for your office or manufacturing plant would take forever and that you’d never have time to program everything. That is simply not true, automated building systems can be easily programmed by anyone in minutes.

BAS Systems Are Expensive

While it’s true that the initial cost for installation would cost you a considerable amount, BAS typically pay for themselves within one or two years by delivering operational efficiencies and energy savings. In fact, some smart building management things that integrated iot platform have generated a positive return on investment within a few months of installation.

You Can Control Everything

While it’s helpful to be able to turn off your lights, lock and unlock doors and adjust thermostats from afar, don’t forget that there are also some things in life that even technology can’t control.

Smart buildings have been proven to save energy, prevent major failures, and streamline facilities management. These myths shouldn’t hold back you from reaping the benefits of BAS.  

Why Should You Refinish Your Hardwood Floor?

 

If you’re in the market for new hardwood flooring, but don’t want to drop all that money on it, you might consider refinishing your existing floor instead. By stripping off your old finish and sanding down the bare wood of your hardwood flooring in Overland Park KS, you can preserve its natural beauty without spending much money at all. However, if you’re wondering why you should consider hardwood floor refinishing in Overland Park KS, read on to learn about some of the benefits this process offers over installing brand new flooring.

What Does Re-Finishing Mean?

When a wood floor is refinished, it’s stripped back to bare wood and then treated again. This can be done for a number of reasons; perhaps surface damage or wear has appeared since installation, maybe you don’t like how it looks anymore, or it just doesn’t fit in with your current decor. Whatever the reason, there are some important things to consider before deciding whether or not to refinish your hardwood floor.

A re-finishing job is an investment, so before you begin it’s important to determine whether or not your wood floors actually need to be re-finished. Hardwood floors lose their original shine and luster as they age. While a coat of polish can mask some of these blemishes, re-finishing will rejuvenate and revive them completely, restoring both the color and texture to its original state.

Choosing a Reputed Wood Flooring Company for Hardwood Floor Refinishing

While it’s tempting to cut corners by using a bargain-priced contractor, using a high-quality and reputable company for a large project such as hardwood floor installation Overland Park KS, refinishing, or repairs is absolutely vital to ensuring that all work is performed to your standards. The last thing you want is low-quality work at twice of what it would have cost if done correctly in the first place.

When Does The Hardwood Floor Need Refinishing?

The best time to refinish a hardwood floor is when it’s dirty and worn out. The coating on well-made floors can last more than 20 years, but if there are scratches and dents, or stains that have soaked into their finish, there are two things you can do: try sanding them down and polishing them, or replacing them. Many homeowners choose to keep an old familiar look by doing repairs.  Refinishing wood floors, however, rejuvenates them – protecting against moisture damage while bringing life back to its natural beauty. Whatever option you choose – repairing or refinishing – choosing to do so at least once every couple of decades will ensure your floor stays beautiful for longer.